Inspection Coordinator

Job Title: Full-time, Permanent Position summary: Support OCTG inspectors in conducting inspections, yard stock management and paperwork - assist with equipment setup, cleaning, sorting and basic measurements under supervision. Key responsibilities Assist inspectors with pre-job setup (cleaning tubulars, positioning pipes, preparing thread protectors and marking). Help with basic measurements, visual checks, and recording simple data (pipe IDs, lengths) into tally sheets under direction. Prepare and maintain inspection area: clean parts before inspection, collect consumables, remove swarf and maintain housekeeping. Assist with instrument handling (carry/position equipment), assist in photographic documentation and help pack/reload accepted/rejected tubulars. Support yard activities: receive deliveries, store tubulars according to ID and client instructions, and help with simple inventory tasks. Follow HSE instructions, PPE use, and report any hazards to the inspector/supervisor. Required qualifications & experience Minimum: School certificate. Previous yard or oil-field experience preferred but not always required. 2–3 years related experience. Desirable skills Willingness to learn NDT basics and progress to inspector training, basic numeracy, ability to follow instructions, physically fit for yard duties, reliable and punctual. Typical progression Many assistants are trained on the job and progress to Junior OCTG Inspector roles once they obtain NDT training/certifications (ASNT levels or company courses). Interested candidates can send their CV to the e-mail address in the Apply for job button.

OCTG Inspector / Tubular Inspector Job Title: Full-time, Permanent Position summary: Perform visual inspections of OCTG products (casing, tubing, drill pipe and related tubulars) to ensure compliance with client specifications, API standards and company quality procedures. Key responsibilities Inspect incoming, in-process and outgoing OCTG tubulars (casing, tubing, drill pipe, and components) using Visual Testing (VT) and Non-Destructive Testing (NDT) methods (MT, PT, UT, EMI, etc.). Perform thread inspections, measure dimensions and verify material IDs / heat numbers against documentation and traceability records. Operate, calibrate and maintain inspection equipment (UT probes, EMI/Rotomac units, MPI/pen testing kits) and perform pre-job equipment checks. Classify, document and report defects (corrosion, cracking, galling, thread damage) and make disposition recommendations per API 5CT / DS-1 / company acceptance criteria. Prepare detailed inspection reports, pipe tally sheets and photographic evidence; maintain accurate records in the inspection system. Liaise with QA/QC, production and client representatives; enforce HSE rules during inspection activities. Required qualifications & experience Technical / vocational certificate preferred. Minimum 4–7 years’ experience in OCTG / tubular inspection. Certifications: ASNT Level II (or equivalent) in MT, PT, UT, VT recommended/ preferred for many roles; training in API standards (API 5CT) is an advantage. Skills & competencies Strong understanding of OCTG product specifications (API 5CT, related reference documents) and inspection acceptance criteria. Able to read technical drawings, work instructions and inspection procedures; good report writing and basic MS Office skills. Attention to detail, good eyesight (or corrected), physical ability to work in yards and lift moderate loads, and adherence to HSE requirements. Typical tools / tests used Visual inspection tools, calipers, thread gauges, UT (ultrasonic), MT (magnetic particle), drift tools, PT (dye/penetrant), EMI/eddy current units, borescopes. Deliverables / KPIs Timely, accurate inspection reports and tally sheets; equipment calibration logs maintained; defect capture rate and correct dispositioning; zero HSE incidents during inspection activities. Interested candidates can send their CV to the e-mail address in the Apply for job button.

Job Title: Full-time, Permanent Position Summary: Supports the organization by ensuring excellence in Quality, Health, Safety, and Environmental (QHSE) performance, maintaining compliance with international standards, and reducing workplace risks. The role involves conducting audits and inspections, preparing reports, coordinating HSE activities, and ensuring that all QHSE systems, equipment, and procedures are effectively implemented and maintained. The position also provides technical QHSE guidance to management and personnel to promote a culture of continuous improvement and safe operations. Key responsibilities Ensure operational excellence in HSE performance and compliance by identifying and controlling health, safety, and environmental risks. Prepare Monthly Statistical Reports and submit them in a timely manner. Promote a culture of continuous quality improvement to reduce HSE risks and support a safe and efficient workplace. Provide technical expertise and guidance to management and staff on QHSE matters. Conduct audits to ensure HSE standards, procedures, and legal requirements are met. Support management in the development, implementation, and continual improvement of the HSE Management System. Perform regular HSE inspections and investigations, prepare accident/incident reports, and follow up on corrective actions. Conduct weekly and monthly Quality and HSE meetings and maintain related documentation. Order, receive, inspect, and maintain required HSE equipment and supplies. Perform internal audits to verify compliance with ISO 9001:2015 (Quality), ISO 14001 (Environmental), and ISO 45001 (Occupational Health & Safety) standards. Ensure the company’s HSE policy is fully understood, implemented, and maintained across all departments. Coordinate logistics activities related to Inspection and QHSE operations, ensuring timely availability of equipment, materials, and documentation. Required qualifications & experience Bachelor’s degree or technical/vocational qualification in HSE, Engineering, Quality, or a related discipline (preferred). Minimum 4–7 years of experience in QHSE roles within industrial, engineering, or operational environments. Strong understanding of ISO 9001:2015, ISO 14001, and ISO 45001 standards. Experience in incident investigation, risk assessment, and audit processes. Proficiency in MS Word, Excel, and PowerPoint. Good command of written and spoken English. Formal HSE-related training and/or certifications (NEBOSH, IOSH, Lead Auditor, etc.) preferred. Skills & competencies Strong communication and interpersonal skills. Excellent analytical and reporting abilities. High attention to detail and strong organizational skills. Ability to work independently and handle multiple tasks under strict deadlines. Team-oriented, adaptable, and proactive in problem-solving. Commitment to promoting a strong safety culture and continuous improvement. Interested candidates can send their CV to the e-mail address in the Apply for job button.